SYSTEM CONFIGURATIONS
Diagram for the system of SkyBridge

How to set channels ?

Condition of Channel Setting

  • using 3chs among 6chs in 5.8Ghz
  • each of 3psc of SB-100 ( Master/Rx ) is connected to 2pcs of SB-200 ( Slave/Tx ).
  • each volume of data transmission is allocated by 4Mbps per a slave in a same channel.

Note for Channel Setting

  • To make up a channel
    One piece of SB-100 or SB-200 for Master/Rx should be connected to one ( 8Mbps ) or two ( 4Mbps ) of Slave/Tx.
    A user can connect several Slaves to one Master, but volume of data transmission will be divided equally as many as the numbers of Slave.
  • To avoid interference between channels
    Do not set the same channel in a neighboring area consecutively.
  • BECAUSE 5.8GHZ BAND HAS A WIRELESS OUTPUT LOWER THAN THAT IN 2.4GHZ
    Please use channels in 5.8Ghz for a near area in distance and those in 2.4Ghz for the relatively longer.